Parametrable operating frequency in the 410-470 MHz band.
Agile RF frequency selection within each frequency band (12.5 kHz steps).
Narrow band GFSK modulation, 12.5 KHz bandwidth.
Selectable output power (up to +20 dBm).
Supports most of Grass Valley LDK500-6000-8000 camera parameters.
Flexible input/output ports for maximum flexibility.
4 general purpose inputs-outputs (TTL) for custom applications.
External fluorescent display for good visibility (same unit used in the Live-Runner).
User-friendly man machine interface.
Always restarts in last operating configuration (even without a display attached).
Save and recall for 6 user-defined configurations.
Fast start-up time (< 4s).
DC power input: 10-14Vdc
Power consumption : < 2W
Operating temperature range : -10°C to +50°C.
Size : 142 x 50 x 35 mm (connectors excluded)
Weight : About 0.4 kg
The following input/output signals are located on TRX transmitter unit:
Type | Name | Description | Format |
I |
VDC IN | Power supply input | XLR - 4 pins |
RS232-DTE | CONTROL CAMERA | Control camera input (connect to OCP400) | DB9 - Male |
RS232-DCE/RS422 | DATA | Raw serial data input | DB9 - Female |
O | UHF | UHF signal output | BNC - 50 Ohms |
I | GPIO | General-purpose LVTTL inputs | Header 3x2 |
The following input/output signals are located on TRX receiver unit:
Type | Name | Description | Format |
I |
VDC IN | Power supply input | XLR - 4 pins |
RS232-DCE | CONTROL CAMERA | Control camera output (connect to camera head) | DB9 - Female |
RS232-DCE/RS422 | DATA | Raw serial data output | DB9 - Female |
I | UHF | UHF signal intput | BNC - 50 Ohms |
O | GPIO | General-purpose LVTTL outputs | Header 3x2 |
Note: the above-mentioned specifications refer to latest release of product software version.
The information in this document is subject to change without notice.