Caractéristiques techniques

  Parametrable operating frequency in the 410-470 MHz band.
  Agile RF frequency selection within each frequency band (12.5 kHz steps).
  Narrow band GFSK modulation, 12.5 KHz bandwidth.
  Selectable output power (up to +20 dBm).
  Supports most of Grass Valley LDK500-6000-8000 camera parameters.
  Flexible input/output ports for maximum flexibility.
  4 general purpose inputs-outputs (TTL) for custom applications.
  External fluorescent display for good visibility (same unit used in the Live-Runner).
  User-friendly man machine interface.
  Always restarts in last operating configuration (even without a display attached).
  Save and recall for 6 user-defined configurations.
  Fast start-up time (< 4s).
  DC power input: 10-14Vdc
  Power consumption : < 2W
  Operating temperature range : -10°C to +50°C.
  Size : 142 x 50 x 35 mm (connectors excluded)
  Weight : About 0.4 kg

Inputs/Outputs

The following input/output signals are located on TRX transmitter unit:

Type Name Description Format
I
VDC IN Power supply input XLR - 4 pins
RS232-DTE CONTROL CAMERA Control camera input (connect to OCP400) DB9 - Male
RS232-DCE/RS422 DATA Raw serial data input DB9 - Female
O UHF UHF signal output BNC - 50 Ohms
I GPIO General-purpose LVTTL inputs Header 3x2

The following input/output signals are located on TRX receiver unit:

Type Name Description Format
I
VDC IN Power supply input XLR - 4 pins
RS232-DCE CONTROL CAMERA Control camera output (connect to camera head) DB9 - Female
RS232-DCE/RS422 DATA Raw serial data output DB9 - Female
I UHF UHF signal intput BNC - 50 Ohms
O GPIO General-purpose LVTTL outputs Header 3x2

Note: the above-mentioned specifications refer to latest release of product software version.
The information in this document is subject to change without notice.